Troubleshooting
574
2. In the Export or Import Configuration block, click Browse to locate a BIN configuration file from
your local system.
3. Click Import to import the configuration file.
Topic
BIN Files Import URL Configuration
BIN Files Import URL Configuration
The following table lists the parameter you can use to configure the BIN files import URL.
static.configuration.url
[1]
It configures the access URL for the custom configuration files.
Note: The file format of custom configuration file must be *.bin.
URL within 511 characters
Settings->Configuration->Export Import Config
[1]
If you change this parameter, the IP phone will reboot to make the change take effect.
Exporting All the Diagnostic Files
Yealink IP phones support three types of diagnostic files (including Pcap trace, log files (boot.log and
sys.log) and BIN configuration files) to help analyze your problem. You can export these files at a time
and troubleshoot if necessary. The file format of exported diagnostic file is *.tar.
Procedure:
1. From the web user interface, navigate to Settings->Configuration.
2. Click Start in the Export All Diagnostic Files field to begin capturing signal traffic.
The system log level will be automatically set to 6.
3. Reproduce the issue.
4. Click Stop in the Export All Diagnostic Files field to stop the capture.
The system log level will be reset to 3.
5. Click Export to open file download window, and then save the diagnostic file to your local system.
A diagnostic file named allconfig.tgz is successfully exported to your local system.
To Next Page
Loading...
Need help?
General
