Yealink T40G Administrator's Guide

Directory
271
Example: Configuring a Directory List
The following example shows configuration for directory list.
Customize the directory list file, and then place this file to the provisioning server “ http://192.168.10.25 ”.
Example
static.directory_setting.url = http://192.168.10.25/favorite_setting.xml
After provisioning, you can press the Directory/Dir soft key to access the desired contact list quickly.
Directory Search Settings
You can configure how the phones search contacts and whether to highlight the matched keywords for
contact searching.
The following shows a search result on T46S/G IP phones:
Topic
Directory Search Settings Configuraion
Directory Search Settings Configuraion
The following table lists the parameters you can use to configure directory search settings.
Parameter
directory.search_type
<y0000000000xx>.cfg
Description
It configures the search type when searching the contact in Local Directory or Remote
Phone Book.
Permitted
Values
0-Approximate string matching, the IP phone will search the contact numbers or
names contain the entered character(s).
1-Prefix matching, the IP phone will search the contact numbers or names start with
the entered character(s).
Default
0

Yealink T40G Specifications

General

SIP Accounts	3
Wall Mountable	Yes
Opus Codec	No
Display	2.3 inch 132x64-pixel graphical LCD
Network	Dual-port Gigabit Ethernet
PoE	Yes
Headset Support	Yes, RJ9 port
Power Adapter	Optional
Voice Codecs	G.722, G.711(A/μ), G.729AB, G.726
Local Phonebook	1000 entries