Security Features
411
Operation Behaviors on Lock Phone
The following table lists the operation behavior when configuring the type of phone lock:
Allowable Behavior: You are allowed to
press the desired Line Key (key type is
Line) or the Speakerphone key to enter
the dialing screen.
Keys not Locked: Line keys (key type is
Line), digit keys, HEADSET key, Volume
key and Speakerphone key.
Note: Line key is not applicable to T19(P)
E2.
The Menu
key (key type
is Menu) is
locked.
Allowable Behavior: You are allowed to
answer or reject incoming calls.
Keys not Locked: Answer and Reject soft
key; OK/√, X, HEADSET key and
Speakerphone key.
Note: Pressing X key to reject the call is
not applicable to T23P/T23G/T21(P)
E2/T19(P) E2 IP phones.
The Menu
key (key type
is Menu) is
locked.
Pre-dialin
g/Dialing
screen
Allowable Behavior: You are allowed to
press the Line Key (key type is Line), input
or modify numbers, dial emergency
numbers and return to idle screen.
Keys not Locked: IME, More, Cancel,
Send, Delete and Line soft key; line key
(key type is Line), X, OK/√, Volume key,
Speakerphone key, digit keys, HEADSET
key and “*”/”#” (key as send).
Note: Line key is not applicable to T19(P)
E2.
The same as All
Keys, but you
can dial any
number.
The Menu
key (key type
is Menu) is
locked.
Allowable Behavior: You are allowed to
end the call, initiate a new call to the
emergency number and resume a call.
Keys not Locked: End Call, Cancel,
Resume, NewCall soft key; line key (key
type is Line), digit keys, X, Volume key,
HEADSET key and Speakerphone key.
The same as All
Keys, but you
can dial any
number.
The Menu
key (key type
is Menu) is
locked.
To Next Page
Loading...
Need help?
General
