Audio Features
383
It enables or disables the IP phone to use the AAL2-G726-16, 24, 32 and 40 MIME
type.
[1]
X is the account ID. For T54S/T48S/T48G/T46S/T46G/T29G, X=1-16; for T52S/T42G/T42S, X=1-12; for
T41P/T41S/T27P/T27G, X=1-6; for T40P/T40G/T23P/T23G, X=1-3; for T21(P) E2, X=1-2; for T19(P) E2, X=1.
Packetization Time (PTime)
PTime is a measurement of the duration (in milliseconds) of the audio data in each RTP packet sent to the
destination, and defines how much network bandwidth is used for the RTP stream transfer. Before
establishing a conversation, codec and ptime are negotiated through SIP signaling. The valid values of
ptime range from 10 to 60, in increments of 10 milliseconds. The default ptime is 20ms. You can also
disable the ptime negotiation.
Topics
Supported PTime of Audio Codec
PTime Configuration
Supported PTime of Audio Codec
The following table summarizes the valid values of ptime for each audio codec:
Packetization Time
(Minimun)
Packetization Time (Maximun)
30ms
(40ms for
T40P/T40G/T23P/T23G/T21(P)
E2/T19(P) E2)