Yealink T40G Administrator's Guide

Phone Customization
137
Format
Description
M is used more than three
times (for example,
MMMM)
It represents the long format of the month.
For example, January, February,…, December
D is used once or more
than once (for example,
DD)
It represents a two-digit day.
For example, 01, 02,…, 31
W/WW
It represents the abbreviation of the day of week.
For example, Mon, Tue,…, Sun
W is used more than twice
(for example, WWW,
WWWW)
It represents the long format of the day of week.
For example, Monday, Tuesday,…, Sunday
Idle Clock Display
Idle clock is displayed on the center of the idle screen by default. You can hide the idle clock, and the
time and date are displayed in the right of the status bar.
It is only applicable to T54S IP phones.
Topic
Idle Clock Display Configuration
Idle Clock Display Configuration
The following table lists the parameter you can use to configure the idle clock display.
Parameter
phone_setting.idle_clock_display.enable
<y0000000000xx>.cfg
Description
It enables or disables the IP phone to display the idle clock.
Note: It is only applicable to T54S IP phones.
Permitted
Values
0-Disabled
1-Enabled
Default
1
Phone UI
Menu->Basic->Display->Idle Clock->Idle Clock Display
Logo Customization
Since a logo is the visual entity signifying an organization or company, you can upload a custom logo

Yealink T40G Specifications

General

SIP Accounts	3
Wall Mountable	Yes
Opus Codec	No
Display	2.3 inch 132x64-pixel graphical LCD
Network	Dual-port Gigabit Ethernet
PoE	Yes
Headset Support	Yes, RJ9 port
Power Adapter	Optional
Voice Codecs	G.722, G.711(A/μ), G.729AB, G.726
Local Phonebook	1000 entries