Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series IP Phones
262
If the phone receives an incoming call from the phone number 0044123456789, it will
search 0044123456789 from the LDAP sever first, if no result found, it will search
+44123456789 from the server again. The phone will display all the search results.
Note: It works only if “ldap.call_in_lookup” is set to 1 (Enabled). You may need to set
“ldap.name_filter” to be (|(cn=%)(sn=%)(telephoneNumber=%)(mobile=%)) for
searching the telephone numbers starting with ”+” symbol.
It configures the display mode of the attribute name for the LDAP contact number.
Note: It works only if “ldap.enable” is set to 1 (Enabled).
0-NumberN (N is an increasing number), for example: Number1, Number2,
Number3…
1-Attribute name pushed by server
It configures the display name of the LDAP phone book.
Example:
ldap.customize_label = Friends
“Friends” will be displayed on the LCD screen at the path Menu->Directory.
If it is left blank, "LDAP" will be the displayed on the LCD screen at the path
Menu->Directory.
Note: It works only if “ldap.enable” is set to 1 (Enabled).
String within 99 characters
Directory->LDAP->LDAP Label
Remote Phone Book
Remote phone book is a centrally maintained phone book, stored on the remote server. Users only need
the access URL of the remote phone book. The IP phone can establish a connection with the remote
server and download the phone book, and then display the remote phone book entries on the phone.
To Next Page
Loading...
Need help?
General
