Yealink T40G Administrator's Guide

Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series IP Phones
304
Programmable Keys Configuration
Speed Dial
Speed dial allows you to speed up dialing the contacts on the phone’s idle screen using dedicated DSS
keys.
Topic
Speed Dial Key Configuration
Speed Dial Key Configuration
There are two ways to configure a Speed Dial key:
 Manually, configure a line key or programmable key as Speed Dial key.
 Automatically, assign a favorite contact, the phone automatically links the contact to a line key.
The following shows manually configuration for a Speed Dial key.
Scenario Conditions
Related Topic
local_contact.favorite.enable = 0
Favorite Contacts
Line Key Configuration
Programmable Key Configuration
linekey.X.type = 13
linekey.X.line = 1
linekey.X.value = 4603
linekey.X.label = Bill
programablekey.X.type = 13
programablekey.X.line = 1
programablekey.X.value = 4603
After provisioning, a Speed Dial key for Bill (4603) is available on the phone, and you can press the Speed
Dial key to call Bill (4603) quickly.
You can configure multiple Speed Dial keys for different contacts which are used frequently or hard to
remember. Alternatively, you can use favorite contact feature, and automatically assign Speed Dial keys
for favorite contacts.
Related Topics
Line Keys Configuration
Programmable Keys Configuration
Password Dial
Password dial feature allows the callee number to be partly displayed on the IP phone when placing a call.

Yealink T40G Specifications

General

SIP Accounts	3
Wall Mountable	Yes
Opus Codec	No
Display	2.3 inch 132x64-pixel graphical LCD
Network	Dual-port Gigabit Ethernet
PoE	Yes
Headset Support	Yes, RJ9 port
Power Adapter	Optional
Voice Codecs	G.722, G.711(A/μ), G.729AB, G.726
Local Phonebook	1000 entries