Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series IP Phones
66
file containing phone’s current settings to your computer to make changes.
Because features and configurations vary by phone models and firmware versions, options available on
each page of the web user interface can vary as well. Note that the features configured via web user
interface are limited. Therefore, you can use the web user interface in conjunction with central
provisioning method and phone user interface.
Topics
Web User Interface Access
Navigating the Web User Interface
Importing CFG Configuration Files to Phone
Exporting CFG Configuration Files from Phone
Web User Interface Access
When configuring IP phones via web user interface, you require a user name and password for access. For
a user, the default user name and password are “user” (case-sensitive). For an administrator, the default
user name and password are “admin” (case-sensitive).
Topics
Accessing the Web User Interface
Quick Login Configuration
Web Server Type Configuration
Accessing the Web User Interface
Procedure
1. Find the phone IP address. Press the OK key when the phone is idle or navigate to Menu->Status
on the phone.
2. Enter the IP address in the address bar of a web browser on your PC.
For example, for IPv4: http://192.168.0.10 or 192.168.0.10; for IPv6:
http://[2005:1:1:1:215:65ff:fe64:6e0a] or [2005:1:1:1:215:65ff:fe64:6e0a]
3. Enter the user name and password.
4. Click Login.
Related Topics
Web Server Type Configuration
User and Administrator Identification
To Next Page
Loading...
Need help?
General
