Yealink T40G Administrator's Guide

Phone Provisioning
69
Values
1-Enabled
Default
1
Web UI
Network->Advanced->Web Server->HTTPS
Phone UI
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu->Advanced (default password: admin) ->Network->Web Server->HTTPS Status
T42G/T42S/T41P/T41S/T40P/T40G/T27P/T27G/T23P/T23G/T21(P) E2/T19(P) E2:
Menu->Settings->Advanced Settings (default password: admin) ->Network->Web
Server->HTTPS Status
Parameter
static.network.port.https
[1]
<y0000000000xx>.cfg
Description
It configures the HTTPS port for the user to access the web user interface of the IP
phone using the HTTPS protocol.
Permitted
Values
Integer from 1 to 65535
Default
443
Web UI
Network->Advanced->Web Server->HTTPS Port (1~65535)
Phone UI
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu->Advanced (default password: admin) ->Network->Web Server->HTTPS Port
T42G/T42S/T41P/T41S/T40P/T40G/T27P/T27G/T23P/T23G/T21(P) E2/T19(P) E2:
Menu->Settings->Advanced Settings (default password: admin) ->Network->Web
Server->HTTPS Port
[1]
If you change this parameter, the IP phone will reboot to make the change take effect.
Navigating the Web User Interface
When you log into the web user interface successfully, the phone status is displayed on the first page of
the web user interface. You can click the navigation bar to customize or click Log Out to log out of the
web user interface.
The following figure is an example when you navigate to Settings->Preference:

Yealink T40G Specifications

General

SIP Accounts	3
Wall Mountable	Yes
Opus Codec	No
Display	2.3 inch 132x64-pixel graphical LCD
Network	Dual-port Gigabit Ethernet
PoE	Yes
Headset Support	Yes, RJ9 port
Power Adapter	Optional
Voice Codecs	G.722, G.711(A/μ), G.729AB, G.726
Local Phonebook	1000 entries