Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series IP Phones
68
Web Server Type Configuration
Yealink IP phones support both HTTP and HTTPS protocols for accessing the web user interface. You can
configure the web server type. Web server type determines access protocol of the web user interface. If
you disable to access web user interface using the HTTP/HTTPS protocol, both you and the user cannot
access the web user interface.
The following table lists the parameters you can use to configure web server type.
static.wui.http_enable
[1]
It enables or disables the user to access the web user interface of the IP phone using
the HTTP protocol.
Network->Advanced->Web Server->HTTP
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu->Advanced (default password: admin) ->Network->Web Server->HTTP Status
T42G/T42S/T41P/T41S/T40P/T40G/T27P/T27G/T23P/T23G/T21(P) E2/T19(P) E2:
Menu->Settings->Advanced Settings (default password: admin) ->Network->Web
Server->HTTP Status
static.network.port.http
[1]
It configures the HTTP port for the user to access the web user interface of the IP
phone using the HTTP protocol.
Network->Advanced->Web Server->HTTP Port (1~65535)
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu->Advanced (default password: admin) ->Network->Web Server->HTTP Port
T42G/T42S/T41P/T41S/T40P/T40G/T27P/T27G/T23P/T23G/T21(P) E2/T19(P) E2:
Menu->Settings->Advanced Settings (default password: admin) ->Network->Web
Server->HTTP Port
static.wui.https_enable
[1]
It enables or disables the user to access the web user interface of the IP phone using
the HTTPS protocol.