Phone Provisioning
67
Quick Login Configuration
You can access to web user interface quickly using the request URI
“https://username:password@phoneIPAddress” (for example, https://admin:admin@192.168.0.10). It will
locate you in the Status web page after accessing the web user interface. It is helpful to quickly log into
the web user interface without entering the username and password in the login page.
Yealink IP phones support domain name customization. You can use a custom domain name to access
the web user interface.
Accessing the web user interface by request URI may be restricted by the web explorer (e.g., Internet
Explorer).
For security purposes, we recommend you to use this feature in a secure network environment.
The following table lists the parameter you can use to configure quick login.
It enables or disables the quick login feature.
Note: It works only if “static.wui.https_enable” is set to 1 (Enabled).
0-Disabled
1-Enabled, you can quickly log into the web user interface using a request URI (for
example, https://admin:admin@192.168.0.10).
It configures the valid domain name to access the web user interface of the IP phone.
Multiple domain names are separated by semicolons.
Example:
wui.secure_domain_list = test.yealink.com
You are only allowed to use test.yealink.com or IP address to access the web user
interface of the IP phone.
Note: To use a domain name to access the web user interface of the IP phone, make
sure your DNS server can resolve the domain name to the IP address of the IP phone.
String
If it is left blank, you are only allowed to use IP address to access the web user
interface of the IP phone.
If it is set to “any”, you can use IP address or any domain name to access the web user
interface of the IP phone.
To Next Page
Loading...
Need help?
General
