Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series IP Phones
142
phone_setting.called_party_info_display.enable
It enables or disables the IP phone to display the identity of the callee when it receives
an incoming call.
Note: The information display method is configured by the parameter
“phone_setting.call_info_display_method”.
Settings->Call Display->Display Called Party Information
phone_setting.call_info_display_method
It configures the call information display method when the IP phone receives an
incoming call, dials an outgoing call or is during an active call.
0-Name+Number
1-Number+Name
2-Name
3-Number
4-Full Contact Info (display name<sip:xxx@domain.com>)
5-Null
Settings->Call Display->Call Information Display Method
phone_setting.incoming_call.horizontal_roll_interval
It configures the interval (in milliseconds) for the IP phone to horizontally scroll the
caller information when the phone is ringing.
account.X.update_ack_while_dialing
[1]
It enables or disables the IP phone to update the display of call ID according to the
ACK message.
Note: It works only if “account.X.refresh_remote_id.enable” is set to 1 (Enabled).
To Next Page
Loading...
Need help?
General
