Yealink T40G Administrator's Guide

Phone Customization
163
Permitted
Values
0-Disabled, you are not allowed to trigger Bluetooth mode to on.
1-Enabled
Default
1
Parameter
features.bluetooth_enable
<y0000000000xx>.cfg
Description
It triggers the Bluetooth mode to on or off.
Note: It is only applicable to
T54S/T52S/T48S/T48G/T46S/T46G/T42S/T41S/T29G/T27G IP phones. It works only if
“static.bluetooth.function.enable” is set to 1 (Enabled).
Permitted
Values
0-Off
1-On
Default
0
Web UI
Features->Bluetooth->Bluetooth Active
Phone UI
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu->Basic->Bluetooth->Bluetooth
T42S/T41S/T27G:
Menu->Settings->Basic Settings->Bluetooth
Parameter
features.bluetooth_adapter_name
<y0000000000xx>.cfg
Description
It configures the Bluetooth device name.
Note: It works only if “features.bluetooth_enable” is set to 1 (On). It is only applicable
to T54S/T52S/T48S/T48G/T46S/T46G/T42S/T41S/T29G/T27G IP phones.
Permitted
Values
String within 64 characters
Default
For T54S IP phones: Yealink T54S.
For T52S IP phones: Yealink T52S.
For T48G IP phones: Yealink T48G.
For T48S IP phones: Yealink T48S.
For T46G IP phones: Yealink T46G.
For T46S IP phones: Yealink T46S.
For T42S IP phones: Yealink T42S.
For T41S IP phones: Yealink T41S.
For T27G IP phones: Yealink T27G.
For T29G IP phones: Yealink T29G.
Phone UI
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu->Basic->Bluetooth->Bluetooth (On)->Edit My Device Information->Device
Name

Yealink T40G Specifications

General

SIP Accounts	3
Wall Mountable	Yes
Opus Codec	No
Display	2.3 inch 132x64-pixel graphical LCD
Network	Dual-port Gigabit Ethernet
PoE	Yes
Headset Support	Yes, RJ9 port
Power Adapter	Optional
Voice Codecs	G.722, G.711(A/μ), G.729AB, G.726
Local Phonebook	1000 entries