Yealink T40G Administrator's Guide

Account Settings
211
admin)->Accounts->Outbound Status
Parameter
account.X.outbound_proxy.Y.address
[1]
<MAC>.cfg
Description
It configures the IP address or domain name of the outbound proxy server Y.
Example:
account.1.outbound_proxy.1.address = 10.1.8.11
Note: It works only if “account.X.outbound_proxy_enable” is set to 1 (Enabled). To use
outbound proxy server address, “account.X.sip_server.Y.outbound_proxy_enable”
should be set to 1 (Enabled).
Permitted
Values
IP address or domain name
Default
Blank
Web UI
Account->Register->Outbound Proxy Server Y
Phone UI
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu->Advanced (default password: admin)->Accounts->Account X->Outbound
ProxyY
T42G/T42S/T41P/T41S/T40P/T40G/T27P/T27G/T23P/T23G/T21(P) E2/T19(P) E2:
Menu->Settings->Advanced Settings (default password:
admin)->Accounts->Outbound ProxyY
Parameter
account.X.outbound_proxy.Y.port
[1]
<MAC>.cfg
Description
It configures the port of the outbound proxy server Y.
Example:
account.1.outbound_proxy.1.port = 5060
Note: It works only if “account.X.outbound_proxy_enable” is set to 1 (Enabled).
Permitted
Values
Integer from 0 to 65535
Default
5060
Web UI
Account->Register->Outbound Proxy Server Y->Port
Parameter
account.X.reg_fail_retry_interval
[1]
<MAC>.cfg
Description
It configures the interval (in seconds) at which the IP phone to retries to re-register
account X when registration fails.
Example:
account.1.reg_fail_retry_interval = 30
Note: It works only if the values of the parameters
"account.X.reg_failed_retry_min_time" and "account.X.reg_failed_retry_max_time" are
set to 0.

Yealink T40G Specifications

General

SIP Accounts	3
Wall Mountable	Yes
Opus Codec	No
Display	2.3 inch 132x64-pixel graphical LCD
Network	Dual-port Gigabit Ethernet
PoE	Yes
Headset Support	Yes, RJ9 port
Power Adapter	Optional
Voice Codecs	G.722, G.711(A/μ), G.729AB, G.726
Local Phonebook	1000 entries