EasyManuals Logo

Yealink T40G Administrator's Guide

Yealink T40G
622 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #262 background imageLoading...
Page #262 background image
Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series IP Phones
242
address from the server during auto provisioning.
The call log file is named after the MAC address of the IP phone. For example, if the MAC address of an IP
phone is 00156574B150, the name of the call log file is 00156574b150-calllog.xml (lowercase).
Tip
MAC address, a unique 12-digit serial number is assigned to each phone. You can obtain it from the bar
code on the back of the IP phone.
The following table lists the parameters you can use to back up the call log.
Parameter
static.auto_provision.local_calllog.backup.enable
<y0000000000xx>.cfg
Description
It enables or disables the IP phone to upload the <MAC>-calllog.xml file to the server
each time the call logs update and download the <MAC>-calllog.xml file from the
server during auto provisioning.
Permitted
Values
0-Disabled, the IP phone does not upload/download the call log file
“<MAC>-calllog.xml” to the server.
1-Enabled, the IP phone uploads the call log file “<MAC>-calllog.xml” to the specific
path configured by the parameter “static.auto_provision.local_calllog.backup.path”
each time the call logs update; and downloads the call logs in the
“<MAC>-calllog.xml” according to its MAC address from the specific path during auto
provisioning.
Default
0
Parameter
static.auto_provision.local_calllog.backup.path
<y0000000000xx>.cfg
Description
It configures a path or URL for the IP phone to upload/download the
<MAC>-calllog.xml file.
If it is left blank, the IP phone connects to the provisioning server URL, and
uploads/downloads the contact file “<MAC>-calllog.xml”.
Example:
static.auto_provision.local_calllog.backup.path = http://192.168.1.20/calllog
Once the call logs update, the IP phone will upload the call log file to the specified
path “http://192.168.1.20/calllog”.
During auto provisioning, the IP phone downloads the call log file
“<MAC>-calllog.xml” from the specified path “http://192.168.1.20/calllog”.
Note: It works only if “static.auto_provision.local_calllog.backup.enable” is set to 1
(Enabled).
Permitted
Values
String
Default
Blank
Parameter
static.auto_provision.local_calllog.write_delay.terminated
<y0000000000xx>.cfg
Description
It configures the delay time (in seconds) for the IP phone to upload the

Table of Contents

Other manuals for Yealink T40G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink T40G and is the answer not in the manual?

Yealink T40G Specifications

General IconGeneral
SIP Accounts3
Wall MountableYes
Opus CodecNo
Display2.3 inch 132x64-pixel graphical LCD
NetworkDual-port Gigabit Ethernet
PoEYes
Headset SupportYes, RJ9 port
Power AdapterOptional
Voice CodecsG.722, G.711(A/μ), G.729AB, G.726
Local Phonebook1000 entries

Related product manuals