Yealink T40G Administrator's Guide

Advanced Features
477
Default
1
Web UI
Features->Intercom->Intercom Allow
Phone UI
Menu->Features->Intercom->Intercom Allow
Parameter
features.intercom.mute
<y0000000000xx>.cfg
Description
It enables or disables the IP phone to mute the microphone when answering an
intercom call.
Note: It works only if “features.intercom.allow” and "features.allow_mute" are set to 1
(Enabled).
Permitted
Values
0-Disabled
1-Enabled, the microphone is muted for intercom calls, and then the other party
cannot hear you.
Default
0
Web UI
Features->Intercom->Intercom Mute
Phone UI
Menu->Features->Intercom->Intercom Mute
Parameter
features.intercom.tone
<y0000000000xx>.cfg
Description
It enables or disables the IP phone to play a warning tone when answering an
intercom call.
Note: It works only if “features.intercom.allow” is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
1
Web UI
Features->Intercom->Intercom Tone
Phone UI
Menu->Features->Intercom->Intercom Tone
Parameter
features.intercom.barge
<y0000000000xx>.cfg
Description
It enables or disables the IP phone to answer an incoming intercom call while there is
already an active call on the IP phone.
Note: It works only if “features.intercom.allow” and "call_waiting.enable" are set to 1
(Enabled) and “phone_setting.call_appearance.calls_per_linekey” is greater than 1.
Permitted
Values
0-Disabled, the IP phone will handle an incoming intercom call like a normal incoming
call while there is already an active call on the IP phone.
1-Enabled, the IP phone will automatically answer the intercom call while there is
already an active call on the IP phone and place the active call on hold.
Default
0
Web UI
Features->Intercom->Intercom Barge

Yealink T40G Specifications

General

SIP Accounts	3
Wall Mountable	Yes
Opus Codec	No
Display	2.3 inch 132x64-pixel graphical LCD
Network	Dual-port Gigabit Ethernet
PoE	Yes
Headset Support	Yes, RJ9 port
Power Adapter	Optional
Voice Codecs	G.722, G.711(A/μ), G.729AB, G.726
Local Phonebook	1000 entries