Yealink T40G Administrator's Guide

Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series IP Phones
30
or
Menu->Settings->Basic Settings->Wi-Fi->Wi-Fi (On)->Known
Network->Option->Edit->Security Mode
Parameter
static.wifi.X.cipher_type
[2]
<y0000000000xx>.cfg
Description
It configures the encryption type of the wireless network X.
If “static.wifi.X.security_mode” is set to NONE, the permitted value of this parameter is
NONE.
If “static.wifi.X.security_mode” is set to WEP, the permitted value of this parameter is
WEP.
If “static.wifi.X.security_mode” is set to other values, the permitted values of this
parameter are TKIP, AES or TKIP AES.
Note: It works only if “static.wifi.enable” is set to 1 (Enabled). It is only applicable to
T54S/T52S/T48S/T48G/T46S/T46G/T42S/T41S/T29G/T27G IP phones.
Permitted
Values
NONE, WEP, TKIP, AES or TKIP AES
Default
NONE
Web UI
Network->Wi-Fi->Cipher Type
Phone UI
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu->Basic->Wi-Fi->Wi-Fi (On)->Known Network (press Add)->Cipher Type
or
Menu->Basic->Wi-Fi->Wi-Fi (On)->Known Network->Option->Edit->Cipher Type
T42S/T41S/T27G:
Menu->Settings->Basic Settings->Wi-Fi (On)->Known Network (press Add)->Cipher
Type
or
Menu->Settings->Basic Settings->Wi-Fi->Wi-Fi (On)->Known
Network->Option->Edit->Cipher Type
Parameter
static.wifi.X.password
[2]
<y0000000000xx>.cfg
Description
It configures the password of the wireless network X.
Note: It works only if “static.wifi.enable” is set to 1 (Enabled) and
“static.wifi.X.security_mode” is set to WEP, WPA-PSK or WPA2-PSK. It is only
applicable to T54S/T52S/T48S/T48G/T46S/T46G/T42S/T41S/T29G/T27G IP phones.
Permitted
Values
String within 64 characters
Default
Blank
Web UI
Network->Wi-Fi->PSK

Yealink T40G Specifications

General

SIP Accounts	3
Wall Mountable	Yes
Opus Codec	No
Display	2.3 inch 132x64-pixel graphical LCD
Network	Dual-port Gigabit Ethernet
PoE	Yes
Headset Support	Yes, RJ9 port
Power Adapter	Optional
Voice Codecs	G.722, G.711(A/μ), G.729AB, G.726
Local Phonebook	1000 entries