Yealink T40G Administrator's Guide

Advanced Features
483
value.
Valid variable values are:
$mac
$ip
$model
$firmware
$active_url
$active_user
$active_host
$local
$remote
$display_local
$display_remote
$call_id
Example:
action_url.setup_completed = http://192.168.0.20/help.xml?IP=$ip
Permitted
Values
URL within 511 characters
The value format is: http(s)://IP address of server/help.xml?variable name=variable
value. For Pre-defined events, refer to Pre-defined Events List. For variable value, refer
to Variable Values List.
Default
Blank
Web UI
Features->Action URL->Setup Completed
Parameter
action_url.registered
<y0000000000xx>.cfg
Description
It configures the action URL the IP phone sends after an account is registered.
Example:
action_url.registered = http://192.168.0.20/help.xml?IP=$ip
Permitted
Values
URL within 511 characters
The value format is: http(s)://IP address of server/help.xml?variable name=variable
value. For Pre-defined events, refer to Pre-defined Events List. For variable value, refer
to Variable Values List.
Default
Blank
Web UI
Features->Action URL->Registered
Parameter
action_url.unregistered
<y0000000000xx>.cfg
Description
It configures the action URL the IP phone sends after an account is unregistered.
Example:

Yealink T40G Specifications

General

SIP Accounts	3
Wall Mountable	Yes
Opus Codec	No
Display	2.3 inch 132x64-pixel graphical LCD
Network	Dual-port Gigabit Ethernet
PoE	Yes
Headset Support	Yes, RJ9 port
Power Adapter	Optional
Voice Codecs	G.722, G.711(A/μ), G.729AB, G.726
Local Phonebook	1000 entries