Yealink T40G Administrator's Guide

Troubleshooting
528
1-Enabled
Default
0
Parameter
features.uc_username
<y0000000000xx>.cfg
Description
It configures the user name for UC authentication.
Note: It works only if “bw.xmpp.enable" is set to 1 (Enabled). It is only applicable to
T54S/T52S/T48S/T48G/T46S/T46G/T29G IP phones.
Permitted
Values
String within 99 characters
Default
Blank
Web UI
Applications->Broadsoft XMPPI->XMPP Account->XMPP UserName (if
bw.xmpp.enable =1)
Parameter
features.uc_password
<y0000000000xx>.cfg
Description
It configures the password for UC authentication.
Note: It works only if “bw.xmpp.enable" is set to 1 (Enabled). It is only applicable to
T54S/T52S/T48S/T48G/T46S/T46G/T29G IP phones.
Permitted
Values
String within 32 characters
Default
Blank
Web UI
Applications->Broadsoft XMPPI->XMPP Account->XMPP Password (if
bw.xmpp.enable =1)
Parameter
bw.xmpp.presence_icon.mode
<y0000000000xx>.cfg
Description
It enables or disables to display presence icon in new style.
Note: It is only applicable to T54S/T52S/T48S/T48G/T46S/T46G/T29G IP phones.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Parameter
bw.xmpp.change_presence.force_manual.enable
<y0000000000xx>.cfg
Description
It enables or disables to synchronize the presence status to BroadWorks server when
you change your presence status manually on the IP phone.
Note: It is only applicable to T54S/T52S/T48S/T48G/T46S/T46G/T29G IP phones.
Permitted
Values
0-Disabled
1-Enabled
Default
1
Parameter
bw.xmpp.change_presence.enable
<y0000000000xx>.cfg

Yealink T40G Specifications

General

SIP Accounts	3
Wall Mountable	Yes
Opus Codec	No
Display	2.3 inch 132x64-pixel graphical LCD
Network	Dual-port Gigabit Ethernet
PoE	Yes
Headset Support	Yes, RJ9 port
Power Adapter	Optional
Voice Codecs	G.722, G.711(A/μ), G.729AB, G.726
Local Phonebook	1000 entries