Yealink T40G Administrator's Guide

Troubleshooting
535
Permitted
Values
Integer from 1 to 2147483647
Default
Blank
Parameter
account.X.supervisor_info_code_name.Y
[1][2]
<MAC>.cfg
Description
It configures the supervisor name.
Permitted
Values
String within 99 characters
Default
Blank
Parameter
account.X.call_center.call_info_enable
[1]
<MAC>.cfg
Description
It enables or disables the call center call information feature.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Parameter
account.X.call_center.show_call_info_time
[1]
<MAC>.cfg
Description
It configures the interval (in seconds) to specify how long the call center call
information displays.
Permitted
Values
Integer from 1 to 86400
Default
30
Parameter
account.X.call_center.disp_code_enable
[1]
<MAC>.cfg
Description
It enables or disables the disposition code feature.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Parameter
account.X.call_center.trace_enable
[1]
<MAC>.cfg
Description
It enables or disables the customer originated trace feature.
Permitted
Values
0-Disabled
1-Enabled, it is used to trace the origin of an obscene, harassing, or threatening call.
Default
0
Parameter
account.X.call_center.emergency_enable
[1]
<MAC>.cfg
Description
It enables or disables the emergency escalation feature.
Permitted
0-Disabled

Yealink T40G Specifications

General

SIP Accounts	3
Wall Mountable	Yes
Opus Codec	No
Display	2.3 inch 132x64-pixel graphical LCD
Network	Dual-port Gigabit Ethernet
PoE	Yes
Headset Support	Yes, RJ9 port
Power Adapter	Optional
Voice Codecs	G.722, G.711(A/μ), G.729AB, G.726
Local Phonebook	1000 entries