Yealink T40G Administrator's Guide

Troubleshooting
545
Parameter
bw.calllog_and_dir
<y0000000000xx>.cfg
Description
It enables or disables the IP phone to directly enter the Network Calls screen when
pressing the History soft key.
Note: It works only if the values of the parameters "bw.xsi.enable" and
"bw.xsi.call_log.enable" are set to 1 (Enabled) and XSI is configured for account 1.
Permitted
Values
0-Disabled, the IP phone will enter Local Calls screen when pressing the History soft
key.
1-Enabled
Default
0
Parameter
search_in_dialing.bw_directory.enable
<y0000000000xx>.cfg
Description
It enables or disables the IP phone to automatically search entries from the BroadSoft
directory, and display the results on the pre-dialing/dialing screen.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Parameter
search_in_dialing.bw_directory.priority
<y0000000000xx>.cfg
Description
It configures the search priority of the BroadSoft directory.
Permitted
Values
Integer greater than or equal to 0
Default
5
Parameter
directory_setting.bw_directory.enable
<y0000000000xx>.cfg
Description
It enables or disables the users to access the BroadSoft directory by pressing the
Directory/Dir soft key.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Parameter
directory_setting.bw_directory.priority
<y0000000000xx>.cfg
Description
It configures the display priority of the BroadSoft directory.
Permitted
Values
Integer greater than or equal to 0
Default
6

Yealink T40G Specifications

General

SIP Accounts	3
Wall Mountable	Yes
Opus Codec	No
Display	2.3 inch 132x64-pixel graphical LCD
Network	Dual-port Gigabit Ethernet
PoE	Yes
Headset Support	Yes, RJ9 port
Power Adapter	Optional
Voice Codecs	G.722, G.711(A/μ), G.729AB, G.726
Local Phonebook	1000 entries