Troubleshooting
559
When you choose a log level, it includes all events of an equal or higher severity level
and excludes events of a lower severity level. The logging level you choose determines
the lowest severity of events to log.
0-system is unusable
1-action must be taken immediately
2-critical condition
3-error conditions
4-warning conditions
5-normal but significant condition
6-informational
Settings->Configuration->Local Log Level
static.local_log.max_file_size
It configures the maximum size (in KB) of the log files (<MAC>-boot.log and
<MAC>-sys.log) can be stored on the IP phone.
When this size is about to be exceeded,
(1) If the local log files are configured to be uploaded to the server by the parameter
“static.auto_provision.local_log.backup.enable”, the IP phone will clear all the local log
files on the phone once successfully backing up.
(2) If “static.auto_provision.local_log.backup.enable” is set to 0 (Disabled), the IP phone
will erase half of the logs from the oldest log information on the phone.
Example:
static.local_log.max_file_size = 1024
For T54S/T52S/T48S/T48G/T46S/T46G/T42G/T42S/T41P/T41S/T29G/T27P/T27G
IP phones:
Integer from 1024 to 2048
For T40P/T40G/T23P/T23G/T21(P) E2/T19(P) E2 IP phones:
Integer from 256 to 1024
For T54S/T52S/T48S/T48G/T46S/T46G/T42G/T42S/T41P/T41S/T29G/T27P/T27G
IP phones:
The default value is 1024
For T40P/T40G/T23P/T23G/T21(P) E2/T19(P) E2 IP phones:
The default value is 256
T54S/T52S/T48S/T48G/T46S/T46G/T42G/T42S/T41P/T41S/T29G/T27P/T27G:
Settings->Configuration->Max Log File Size (1024-2048KB)
T40P/T40G/T23P/T23G/T21(P) E2/T19(P) E2:
To Next Page
Loading...
Need help?
General
