Yealink T40G Administrator's Guide

Troubleshooting
562
Default
120
Exporting the Log Files to a Local PC
1. From the web user interface, navigate to Settings->Configuration.
2. Select Enabled from the pull-down list of Enable Local Log.
3. Select 6 from the pull-down list of Local Log Level.
The default local log level is “3”.
4. Enter the limit size of the log files in the Max Log File Size field.
5. Click Confirm to accept the change.
6. Reproduce the issue.
7. Click Export to open the file download window, and then save the file to your local system.
Viewing the Log Files
You can verify whether you got the correct log through the following key fields:
 <0+emerg>
 <1+alert>
 <2+crit>
 <3+error>
 <4+warning>
 <5+notice>
 <6+info>
The default local log level is 3.
The following figure shows a portion of a boot log file (for example, 00156574b150-boot.log):

Yealink T40G Specifications

General

SIP Accounts	3
Wall Mountable	Yes
Opus Codec	No
Display	2.3 inch 132x64-pixel graphical LCD
Network	Dual-port Gigabit Ethernet
PoE	Yes
Headset Support	Yes, RJ9 port
Power Adapter	Optional
Voice Codecs	G.722, G.711(A/μ), G.729AB, G.726
Local Phonebook	1000 entries