Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series IP Phones
46
->Network->802.1x->802.1x Mode
static.network.802_1x.eap_fast_provision_mode
[1]
It configures the EAP In-Band provisioning method for EAP-FAST.
Note: It works only if “static.network.802_1x.mode” is set to 7 (EAP-FAST).
0-Unauthenticated Provisioning, EAP In-Band provisioning is enabled by server
unauthenticated PAC (Protected Access Credential) provisioning using anonymous
Diffie-Hellman key exchange.
1-Authenticated Provisioning, EAP In-Band provisioning is enabled by server
authenticated PAC provisioning using certificate based server authentication.
Network->Advanced->802.1x->Provisioning Mode
static.network.802_1x.anonymous_identity
[1]
It configures the anonymous identity (user name) for 802.1X authentication.
It is used for constructing a secure tunnel for 802.1X authentication.
Example:
static.network.802_1x.anonymous_identity = user@yealink.com
Note: It works only if “static.network.802_1x.mode” is set to 2, 3, 4, 5, 6 or 7.
String within 512 characters
Network->Advanced->802.1x->Anonymous Identity
static.network.802_1x.identity
[1]
It configures the user name for 802.1x authentication.
Example:
static.network.802_1x.identity = yealink
Note: It works only if “static.network.802_1x.mode” is set to 1, 2, 3, 4, 5, 6 or 7.
String within 32 characters
Network->Advanced->802.1x->Identity
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu->Advanced (default password: admin) ->Network->802.1x->Identity
T42G/T42S/T41P/T41S/T40P/T40G/T27P/T27G/T23P/T23G/T21(P) E2/T19(P) E2:
Menu->Settings->Advanced Settings (default password: admin)
To Next Page
Loading...
Need help?
General
