5-3
Agilent 7500 ICP-MS ChemStation Operator’s Manual
Creating a Method
Creating a Method Using the Method Wizard
The method wizard is an easy way to create a method, even for beginners. Simply
select an application and sample type, and a method suitable for the system
configuration will automatically be created. With the wizard, a limited number of
application and sample types are available.
A method created using the method wizard may be used immediately or edited using
the Edit Default Method command. A method can also be created using the default
method, rather than using the method wizard, as in the preceding model of
ChemStation. For details on editing the default method, see Editing Default Method
below.
The instrument types are defined as follows.
• ORS model: A model with an octopole reaction cell
Agilent 7500ce and 7500cs
• Non-ORS model: A model without an octopole reaction cell
Agilent 7500a
Follow the procedure described below to create a method using the method wizard.
1 Specify the method filename.
2 Select a sample.
3 Edit the element information.
4 Edit the report information.
5 Check the created method.
To Next Page
Loading...
Need help?
General
