Agilent Technologies 7500 ICP-MS - Printing a Time Chart

10-19
Agilent 7500 ICP-MS ChemStation Operator’s Manual
Viewing a Time Chart
Printing a Time Chart
You can print a time chart display at any time during the analytical process. For
example, if you have changed the horizontal scale to show only the acquisition
period from 50 to 100 seconds, you can print the resulting time chart display. If you
have changed the display type, you can print the time chart display showing the new
type.
The following header information is printed on the time chart.
• File name
• Operator name (ACQ, DA)*
* ACQ and DA are differentiated only when the access control pack is used.
• Date/time of measurement
• Measurement mode
• Sample type
• Sample name
• Comment
• Pre-dilution factor
• Automatic dilution factor
• Overall dilution factor
• Method
• ISTD concentration
To print the displayed time chart, select Data File >> Print.