Agilent Technologies 7500 ICP-MS User Manual

5-20
Agilent 7500 ICP-MS ChemStation Operator’s Manual
Creating a Method
Setting Acquisition Parameters
The following sections explain the six acquisition modes:
Spectrum
Using the Spectrum mode, you can perform qualitative, semiquantitative, and
quantitative analysis. This section will explain how to set parameters for all three
types of analysis.
To set the Acquisition Mode to Spectrum, complete the following steps:
1 Click the Spectrum.
The button is marked and the selected mode is outlined.
2Click OK.
ChemStation sets Spectrum as the acquisition mode for the method and the Spec-
trum Acquisition Parameters dialog box appears.
Spectrum Acquisition Parameters Dialog Box

Agilent Technologies 7500 ICP-MS Specifications

General

Brand	Agilent Technologies
Model	7500 ICP-MS
Category	Laboratory Equipment
Language	English