9-21
Agilent 7500 ICP-MS ChemStation Operator’s Manual
Viewing Spectra
Performing a Mass Tabulation
ChemStation also provides detailed information about each mass in a sample. You
can view this detailed information by performing a mass tabulation.
Before you can perform any tabulation, you must load a data file into the Data Anal-
ysis window if one is not already showing. For information about loading the data
file, see “Loading a Data File” in this chapter.
To view a tabulation giving information about the elements in a sample, complete
the following steps:
1 Select Data Analysis
>>Main Panel.
The ICP-MS Data Analysis window appears.
2 Select Data File
>>Tabulate Spectrum/Mass.
The Report Pad - DATA FILE NAME.TAB window appears. This window shows a
tabulation containing information about the elements for the current data file. The
spectrum number, the total acquisition time in seconds, and the data file name
appear at the top of the file.
Mass Tabulation
To Next Page
Loading...
