9-16
Agilent 7500 ICP-MS ChemStation Operator’s Manual
Viewing Spectra
Labeling Spectra
You may want to label a spectrum after you have added templates to it or before you
print it. ChemStation enables you to name or add identifying information to a spec-
trum, a feature which is useful if you want to save a hard copy of a spectrum for
future reference.
To label a spectrum, complete the following steps:
1 Load the appropriate file in the ICP-MS Data Analysis window.
For more information, see “Loading a Data File” in this chapter.
2 Place the mouse pointer exactly where you want the label to appear.
Note both the horizontal and vertical placement of the mouse pointer.
3 Click both mouse buttons at the same time.
The Annotate dialog box appears.
Annotate Dialog Box
4 Click the Left, Center, or Right Justify button.
The label will appear to the right, center, or left of the location you specified in
Step2.
5 Type a name or other identifying information in the text box.
6Click Add.
ChemStation returns to the spectrum, and the information you typed appears at the
location of the cursor. You can make as many labels as you like.
To Next Page
Loading...
Need help?
General
