1-8
Agilent 7500 ICP-MS ChemStation Operator’s Manual
Using the Agilent 7500 ICP-MS ChemStation Software
Supplemental Information
Listed in this section is useful information for using the ICP-MS ChemStation
software:
• File names should not be any longer than 8 letters and/or numbers.
It must not contain the following characters:
Period ( . ) Slash ( / ) Brackets ( [ ] )
Comma ( , ) Backslash ( \ ) Vertical bar ( | )
Semicolon ( ; ) Equal sign ( + ) Space ( )
Colon ( : ) Quotation mark ( “ )
• If the ICP-MS ChemStation hangs up and you need to shutdown the software
using Windows task manager, you must select ICPACQ.EXE, ICPDA.EXE,
ICPTUNE.EXE, and MSTOP.EXE and click on the End Process button to
completely shutdown ChemStation.
• Please use “. (periods)” for decimal points, and “, (commas)” for separating
digits.
e.g. forty six thousand six hundred and twenty three point two:
46,623.2
comma
period
To Next Page
Loading...
