Agilent Technologies 7500 ICP-MS User Manual

5-86
Agilent 7500 ICP-MS ChemStation Operator’s Manual
Creating a Method
If you select SemiQuant and click OK, the SemiQuant Parameters dialog box
appears, followed by the Internal Standard Correction (Normal Mode) and Blank
Conc. Subtraction (SemiQuant) dialog box.
If you select IR and click OK, the IR Parameters dialog box appears.
If you select ID and click OK, the ID Parameters dialog box appears.
For more information about editing these analysis parameters, please refer to the
appropriate sections of Chapters 12-15.
When you have finished editing the analysis parameters, either the QC Database
dialog box or the QC Tune Criteria Editor dialog box appears.
NOTE If your QC configuration does not include any QC parameters, the QC database or
the QC Tune Criteria Editor dialog box will not appear.
Editing QC Parameters
For more information about editing QC Database and QC Tune Criteria parameters,
please refer to the appropriate sections of the Intelligent Sequence Manual.
When you have finished editing the QC parameters, the Method Save Options
dialog box appears.
Method Save Options Dialog Box
NOTE If your QC configuration does not include any QC parameters, the Verify QC Method
option will not appear.

Agilent Technologies 7500 ICP-MS Specifications

General

Brand	Agilent Technologies
Model	7500 ICP-MS
Category	Laboratory Equipment
Language	English