15-9
Agilent 7500 ICP-MS ChemStation Operator’s Manual
Performing an Isotope Dilution Analysis
Generating an Isotope Dilution Analysis Report
You can tell ChemStation to generate the report automatically each time a method
runs. When you do so, you specify whether to generate an isotope dilution analysis
report, and whether to send the report to the screen, the printer or a file. For
information about how to generate an Isotope Dilution Analysis report
automatically (using a method), see Chapter 5, “Creating a Method”.
If you did not tell ChemStation to generate a report automatically, you can also
generate a report manually.
To do so, complete the following steps:
1 Select Top
>>Data Analysis.
The Data Analysis menu appears.
2 Select Data Analysis
>>Main Panel.
The Data Analysis window appears.
NOTE You can also work on the Offline Data Analysis by double-clicking on the Offline
Data Analysis icon.
3 Select Data File>>Load.
The Load Data File dialog box appears.