5-36
Agilent 7500 ICP-MS ChemStation Operator’s Manual
Creating a Method
Time Resolved Analysis (TRA)
Time Resolved Analysis acquisition (TRA) produces a transient signal that appears
as an intensity versus time plot (time chart). This acquisition mode is usually used
when the signal changes with time (transient signal). You can monitor the signals
including a time factor for each selected mass. It is also convenient for applications
which combine the Agilent 7500 with peripheral equipment, such as the Laser Abla-
tion, the Ion Chromatograph, etc.
To set the Acquisition Mode to Time Resolved Analysis, complete the following
steps:
1 Click the Time Resolved Analysis button.
The button is marked and the selected mode is outlined.
Acquisition Mode Dialog Box---Time Resolved Analysis
To Next Page
Loading...
