Agilent Technologies 7500 ICP-MS - Viewing the Sequence Log File

6-17
Agilent 7500 ICP-MS ChemStation Operator’s Manual
Setting Up a Sequence
Viewing the Sequence Log File
The Sequence Log file is generated every time a sequence is simulated or run. The
file contains a list of vial numbers, names of data files, and any error messages gen-
erated during the sequence.
To view the sequence log file, complete the following steps:
1 Select Sequence>>View Sequence Log.
A Report Pad window appears showing the sequence log file for the sequence you
just simulated or ran. ChemStation saves the log file as a Sequence Log each time
you simulate or run a sequence.
Error Action Codes at the header part and Error Check and Action sections are
effective when the intelligent function* is used. For more detailed information, see
the appropriate sections of the Intelligent Sequence Manual.
* Intelligent functions are available when the Intelligent Sequence software is
installed.
Sequence.log - Report Pad Window