Agilent Technologies 7500 ICP-MS

13-16
Agilent 7500 ICP-MS ChemStation Operator’s Manual
Performing a Semiquantitative Analysis
2 Enter a file name and click OK.
The Save SemiQuant Parameter File dialog box will close and the semiquantitative
parameters will be saved.
Loading Parameters
The saved semiquantitative parameters can be loaded into ChemStation using the
following method.
1Click Load Parameters.
The Load SemiQuant Parameter File dialog box will appear.
Load SemiQuant Parameter File Dialog Box
2 Select a calibration file using one of the following methods.
• Select a file name in the displayed list and click OK.
• Double-click a file name in the displayed list.
• Enter a file name and click OK.
The Load SemiQuant Parameter File dialog box will close and the selected
semiquantitative parameters will be loaded.