5-87
Agilent 7500 ICP-MS ChemStation Operator’s Manual
Creating a Method
Saving a Method and Calibration
To save the selected method and calibration just created, complete the following
steps:
1 Select the Method Save Options by clicking on the boxes for each option.
There are 5 options available on the Method Save Options dialog box:
• Click the Alert when Meth-Calib Link Updated box if you want the ChemStation
to alert you with a message when the Method and Calibration link is changed
• Click the Use Same Name for Meth and Calib box if you want to save the
method and calibration with the same name.
• Click the Alert when Method is Overwritten box if you want the ChemStation to
alert you with a message when an existing method will be overwritten.
• Click the Alert when Calib is Overwritten box if you want the ChemStation to
alert you with a message when an existing calibration will be overwritten.
• Click the Verify QC Method box if you want ChemStation to verify the QC
method.
2 After selecting the options, click OK.
If you have selected the Verify QC Method option, ChemStation will verify the QC
method.
After verifying the QC method, the Save Calibration As dialog box appears.
Save Calibration As Dialog Box
To Next Page
Loading...
Need help?
General
