5-6
Agilent 7500 ICP-MS ChemStation Operator’s Manual
Creating a Method
Selecting a Sample
Select a sample on the Sample page by the procedure described below.
1 Select an application from Application Type.
Application Type shows only the applications supported by the current system
configuration. The available options (Sample and Regulation) vary depending on
the selected application.
Sample Page
2 Select a sample.
The available options (Regulation and Guideline) vary depending on the selected
sample. An explanation of the sample appears at the bottom of the screen.
3 Click on Next.
The Elements page appears.
NOTE If the settings on the Sample page are re-edited after the Element or Reports page is
viewed, the settings on the Element or Reports page will be reset to the default
values.
To Next Page
Loading...
Need help?
General
