5-10
Agilent 7500 ICP-MS ChemStation Operator’s Manual
Creating a Method
Editing Report Information
Edit the report information by the procedure described below.
1 Select a report style in Style.
Reports page
2 Select the destination to which the report is to be output in Destination.
• Screen
Creates a report and displays it in the report pad.
• Printer
Creates a report and outputs it to the connected printer. For a detailed report, the
output destination is set to the printer only.
• File
Creates a report and saves it as a file. Enter the filename.
3 When creating a QC report, check the Generate QC Report box.
The QC database must be edited after the method wizard is closed.
NOTE When the QC mode doesn’t include a QC check, the Generate QC Report check box
will be grayed out.
4 Click on Next.
The Finish page appears.
To Next Page
Loading...
Need help?
General
