Agilent Technologies 7500 ICP-MS User Manual

5-15
Agilent 7500 ICP-MS ChemStation Operator’s Manual
Creating a Method
3 You can select the data file output format.
• Export AIA format for Agilent LC/GC checkbox
Selecting this checkbox will cause the data file to be saved in AIA format as well.
This file is saved to the data file folder. Use the Agilent LC/GC ChemStation to
import the file for display or analysis.
• Export Agilent LC/MSD raw data checkbox
Selecting this checkbox will cause the data file to be saved as LC/MSD raw data
as well. This file is saved to the data file folder. Use the Agilent LC/MSD
ChemStation to load, display, or analyze the file.
4 Click the Data Acquisition check box.
The default method should show this check box already marked. For data acquisi-
tion to occur, you must click the check box if it is not already marked.
5 Click the Data Analysis check box.
Clicking this box tells ChemStation to run the data analysis section of the method
following data acquisition.
NOTE The pre-and post-run macro command check boxes enable you to execute actions
before or after acquisition. Macros included with ChemStation allow automatic
instrument startup and shutdown. Contact Agilent Technologies engineers for
information about these as well as additional customized macros.
6Click OK to enter the changes.
The Interference Equation dialog box appears. To continue creating the equation,
see “Creating/Editing Interference Correction Equations” in the next section.

Agilent Technologies 7500 ICP-MS Specifications

General

Brand	Agilent Technologies
Model	7500 ICP-MS
Category	Laboratory Equipment
Language	English