Agilent Technologies 7500 ICP-MS User Manual

5-44
Agilent 7500 ICP-MS ChemStation Operator’s Manual
Creating a Method
the file.
• Double-click a tune file in the displayed list.
ChemStation will return to the Time Program dialog box.
4 To set the start time for a step, click Skip.
For executing a step of interest, click on the Skip button to display the start time for
that step. The start time displayed for a step includes the acquisition time for the
preceding step. Note that the integration time and acquisition time for a step must be
set before the start time for that step can be set.
When you want to skip a specific step without executing it, you can also use this
button to display “skip” for that step in the list box.
5 To copy parameters from the current step to another one, complete the following
steps:
a) Click Copy Parameter.
The Copy Parameter dialog box appears, asking which step you want to copy the
current parameters to.
Copy Parameter Dialog Box
b) Click the step in the dialog box that you want to copy parameters to and
then click OK.

Agilent Technologies 7500 ICP-MS Specifications

General

Brand	Agilent Technologies
Model	7500 ICP-MS
Category	Laboratory Equipment
Language	English