5-73
Agilent 7500 ICP-MS ChemStation Operator’s Manual
Creating a Method
To select the type of report you want to generate when the quantitation method runs,
complete the following steps:
1 Select a report format in the Quantitation Report area.
To generate the default quantitation report, select the box for Quantitation Report .
To generate a custom report template for quantitative analysis when the method
runs, click the Custom Report box.
To update a custom report database for quantitative analysis when the method runs,
click the Update Custom Database check box.
2 To produce a batch file of the report, select the check box Copy saved Text
Reports to ‘Reports’ folder.
If the setting to save reports as a file is selected as described in step 4, the same
information will be saved in a file named “fq_FILE NAME.tex” in the Reports
directory.
This setting is used to allow an external applications to obtain reports periodically.
3Click OK.
4 Set the generating style of the quantitation report as follows:
To generate the default quantitation report, complete the following steps:
a) The FullQuant Report Option dialog box appears.
FullQuant Report Option Dialog Box
To Next Page
Loading...
Need help?
General
