5-77
Agilent 7500 ICP-MS ChemStation Operator’s Manual
Creating a Method
To generate a QC Report, complete the following steps:
NOTE If your QC configuration does not include any QC parameters, the QC Report section
will be grayed out.
1 Click the QC Report box and click OK.
2 To produce a batch file of the report, select the check box Copy saved Text
Reports to ‘Reports’ folder.
If the setting to save reports as a file is selected as described in step 4, the same
information will be saved in a file named “qc_FILE NAME.tex” in the Reports
directory.
This setting is used to allow an external applications to obtain reports periodically.
3Click OK.
The QC Report Options dialog box appears.
QC Report Option Dialog Box
4 Select either Print Only or Recalculate then Print for QC Report, and click OK.
For more information about the QC report, refer to the appropriate sections of the
Intelligent Sequence Manual.
After setting all selected report options, the screen goes on to Edit Analysis
Parameters, explained later in this chapter.
To Next Page
Loading...
