7-5
Agilent 7500 ICP-MS ChemStation Operator’s Manual
Chained Sequence
• Data Batch…
When the “Sequence File” area is left without any name, a new data batch directory
as the destination for the data files is created in the c:\icpchem\1\data at the time you
begin your sequence using Full Method. It is named for the current date and time.
You can also select or create a data batch directory by double-clicking the Data
Batch field. The Input Data Batch dialog box appears. Select an existing data batch,
or type the file name into the Data Batch Directory field.
Input Data Batch Dialog Box
NOTE When you use Reprocessing Only as the Method Section to Run, select the existing
data batch directory you want to reprocess.
To Next Page
Loading...
