Agilent Technologies 7500 ICP-MS

8-16
Agilent 7500 ICP-MS ChemStation Operator’s Manual
Running a Sample Analysis
To use Acquired Run, complete the following steps from the Top window:
1 Select AcquireData>>Main Panel.
The ICP-MS Acquisition window appears.
2 Select AcquireData
>>Acquire Data.
The Acquire Data dialog box appears.
Acquire Data Dialog Box
3 Type the data file name and directory where you want to save the file.
To change the directory, type a question mark (?) in the Data File Name text box.
4 Type the operator name and sample information.
ChemStation records this information as a header for the data file.
5 Set a dilution factor if necessary.
Enter a dilution factor directly or click Calculate and follow the procedure
described below.
1) Click Calculate.