9-31
Agilent 7500 ICP-MS ChemStation Operator’s Manual
Viewing Spectra
To include the element you excluded on a certain replicate file, or to include a whole
replicate file that you excluded from the average file, complete the following steps:
1 Place the cursor on the element or any other cell in the same row you want to
include and click.
The selected cell will be outlined.
2 Select RepetitionFile>>Include Element(s).
The crossed out element will be restored.
NOTE To include the whole replicate file, select RepetitionFile>>Include All Elements.
3 Select RepetitionFile>>Recalculate Average.
The data base will recalculate the average file, including the data you just restored
and display the average data sheet.
To Next Page
Loading...
Need help?
General
