Agilent Technologies 7500 ICP-MS

10-22
Agilent 7500 ICP-MS ChemStation Operator’s Manual
Viewing a Time Chart
Integration Parameters Dialog Box 2
3 Click the Current Data or Acq. Method.
Current Data shows in the dialog box the masses acquired in the current file. Acq.
Method shows the masses set by the current acquisition parameters. Select Acq.
Method when setting up Data Analysis integration parameters prior to data acquisi-
tion via running a method or a sequence.
4 To save the integration parameters listed in the dialog box, click OK.
NOTE After you set the integration parameters, you must save the method. To do so, select
Methods>>Save from the ICP-MS Top window menu.