11-18
Agilent 7500 ICP-MS ChemStation Operator’s Manual
Creating Custom Reports/Database
• All Elements tree in the right box
After clicking All Elements in the right box, you can select the items under the
Quant Element and Quant Element (Replicate Data) tree in the left box and add
to the All Elements tree in the right box. It enables you to layout data for all ele-
ments by selecting one item.
7 When you have selected all the necessary items from the left box, Click OK.
The Custom report database template appears.
Custom Report Database Template ñ Full Quant Mode
Line 1: Ion name
Line 2: Label
Line 3: The current data
Line 4 ~12: The parameters set in the Global Chart options dialog box and the
Individual Chart options dialog box are displayed.
NOTE Do not edit the information between the Line 4 and Line 12.
When Template
>>Load new data file is selected, ChemStation adds the new data to
the bottom line of the database.
NOTE The Script box in the Font dialog box (Format>>Font), is not applicable on the
Custom report.
To add Raw Counts/CPS of Quant Element (Replicate Data), click on Raw
Counts/CPS and select a numerical value in the each list box for Tune Step and
To Next Page
Loading...
