13-5
Agilent 7500 ICP-MS ChemStation Operator’s Manual
Performing a Semiquantitative Analysis
4 Select a data file using one of the following methods:
• Click a file in the displayed list and click OK.
• Double-click a file in the displayed list.
• Type the file name and click OK.
ChemStation loads the data file and returns to the Data Analysis window.
Selecting File>>Next Data File will load the data file that alphabetically follows
the current data file in the same directory. For example, if the directory contains the
following files:
Soil01.d
Soil02.d
Soil03.d
Water01.d
Water02.d
Water03.d
and soil03.d is currently displayed, selecting Next Data File will load water01.d. If
the current data file is the last one in the directory (in this example water03.d) the
message No Next File is displayed. To initiate this feature, the user must have first
selected a data file from the Load Data File dialog box (from the Data File menu in
Data Analysis).
This menu item is not related to the numbered items near the bottom of the menu,
which display the most recently loaded data files.
The three most recently loaded data files are listed as numbered menu items, with
the first entry corresponding to the most recently loaded data file. Selecting any one
of these numbered menu items will cause that file to be loaded into data analysis.
NOTE Before you start sample data analysis, you should correct the original ChemStation
data with the standard solution response. First load your standard file, correct the
sensitivity, then analyze your sample data.
To Next Page
Loading...
Need help?
General
