Agilent Technologies 7500 ICP-MS - Page 573

18-43
Agilent 7500 ICP-MS ChemStation Operator’s Manual
Installing the Agilent 7500 ChemStation Software (Windows XP)
5Click Browse….
The Browse dialog box appears.
6Click My Computer from the list on the left hand side of the Browse dialog box.
Select (C:) --> ICPCHEM --> ICPEXE --> icpacq.exe from the list on the right.
Confirm selection of “icpacq.exe” as shown in the screen below, then click Open.
If the ChemStation has been installed into a drive other than C:, specify the
correct drive.
The Add a Program dialog box appears.