19-6
Agilent 7500 ICP-MS ChemStation Operator’s Manual
Installing the Agilent 7500 ChemStation Software (Windows 2000)
Click on the Number tab and Select “.” (Dot) in the Decimal Symbol box.
Click OK.
6 Internet Protocol (TCP / IP) Properties
1 Double click Network and Dial-up Connections icon in the Control Panel.
2 Right click Local Area Connection, select Properties.
3 Select Internet Protocol (TCP / IP), select Properties.
4 Input the following information for a simple direct connection.
IP address : 192.168.1.127
Subnet mask : 255.255.255.0
5 Click Advanced button, select WINS tab, then select ON the Enable LMHOSTS
lookup.
6 Click OK.
NOTE If you connect the instrument to the local network, you will need to talk with the
network administrator. You may want to call your local ICP-MS tech support team
for additional assistance.
To connect to site LAN, you are expected to understand the Windows XP operating
system and TCP/IP networking, such as host name, IP address, subnet mask settings.
You should also be familiar with the particular hardware devices and configurations
of your organization's local area network.
To Next Page
Loading...
Need help?
General
